Ubiquiti USW-Pro-XG-10-PoE UniFi professional-grade 10-port, Layer 3 Etherlighting™ PoE+++ switch with (10) 10 GbE (2) 10G SFP+ ports.
Ubiquiti USW-Pro-XG-10-PoE is a Layer 3 managed switch with ten 10 GbE PoE+++ ports, a 400W power budget, two 10G SFP+ uplinks, and Etherlighting port indicators. Managed through the UniFi Network app.
About Ubiquiti USW-Pro-XG-10-PoE UniFi professional-grade 10-port, Layer 3 Etherlighting™ PoE+++ switch with (10) 10 GbE (2) 10G SFP+ ports.
The Ubiquiti Pro XG 10 PoE is a 1U rack-mount, Layer 3 managed switch built for networks that need serious speed and serious power. It packs ten 10 GbE ports and two 10G SFP+ ports, with every RJ45 port supporting PoE+++ and a 400W total power budget. That means high-draw access points, PTZ cameras, and displays all run off a single cable, with no separate power supplies cluttering the comms room.
Key Features
- Ten 10 GbE PoE+++ Ports — Each port handles 10G/5G/2.5G/1G/100M speeds, so your older gear and your fastest kit can share the same switch.
- 400W PoE Budget — Delivers up to 90W per port under PoE+++, enough for power-hungry devices that normally need their own plug.
- Two 10G SFP+ Uplinks — Both run at 10G or 1G, giving you fast fibre or DAC links back to the core of your network.
- Etherlighting Ports — Illuminated ports show location, speed or link status, and the native VLAN network, which makes tracing a cable far less of a headache.
- Layer 3 Performance — 240 Gbps switching capacity, a 179 Mpps forwarding rate, support for 1,000 VLANs, and inter-VLAN routing keep traffic moving where it should.
- Touchscreen and UniFi Management — A 1.3" touchscreen handles quick checks on site, while the UniFi Network app covers the deeper configuration from anywhere.
- Backup Power Ready — DC power backup support via a UniFi RPS helps keep connected devices online if mains power drops out.
Why Choose This Product?
Our Telrexperts recommend the Pro XG 10 PoE for offices, studios, and sites rolling out 10G to the desk or high-powered PoE devices. Steel construction and cooling fans keep it steady under load, and it slots neatly into any existing UniFi setup. Need a hand planning your ports or power budget? Give our team a yell.
What's in the Box
- UniFi Switch Pro XG 10 PoE
- Power Cable
- Rack-Mount Ears and Screws
- Cage Nuts
- Rubber Feet
- Quick Start Guide
| Specification | Value |
|---|---|
| Brand | Ubiquiti |
| Product Line | UniFi |
| Model / SKU | USW-Pro-XG-10-PoE |
| Product Type | 1U, professional-grade 10-port, Layer 3 Etherlighting™ PoE+++ managed switch |
| Form Factor | Rack mount (1U) |
| 10 GbE RJ45 Ports | 10 (all PoE+++), 10G/5G/2.5G/1G/100M |
| SFP+ Ports | 2 × 10G SFP+ (10G/1G) |
| Layer 3 Support | Yes |
| Switching Capacity | 240 Gbps |
| Total Non-Blocking Throughput | 120 Gbps |
| Forwarding Rate | 179 Mpps |
| Supported VLANs | 1,000 |
| MAC Address Table Size | 32,000 |
| L3 Table Size | 12,000 ARP entries; 12,000 IPv4 routes |
| IPv4 Static Routes | 256 |
| Packet Buffer Size | 2 MB |
| Access Lists | IPv4: 128; MAC: 128 |
| Max PoE Output | Up to PoE+++ (802.3bt) |
| PoE Ports | 10 × PoE+++ |
| Total PoE Availability | 400 W |
| PoE Wattage per Port by PSE | PoE: 15.4 W; PoE+: 30 W; PoE++: 60 W; PoE+++: 90 W |
| Power Supply | AC/DC, internal, 550 W |
| Supported Voltage Range | 100–240 V AC |
| Max Power Consumption | 65 W (excluding PoE output); 520 W (including PoE output) |
| Redundancy | DC power backup (requires UniFi RPS) |
| Dimensions | 442.4 × 285 × 44 mm (17.4 × 11.2 × 1.7") |
| Weight | 4.6 kg (10.14 lb) without mounting brackets; 4.7 kg (10.36 lb) with mounting brackets |
| Enclosure Material | SGCC steel |
| Mount Material | SGCC steel |
| Supported Rack Depth | 400–1200 mm (15.7–47.2") |
| Display | 1.3" touchscreen LCM |
| Management | Ethernet; AR (UniFi Network application) |
| Controls | Touchscreen, reset button |
| Etherlighting™ | Yes |
| Operating Temperature | -5 to 40 °C (23 to 104 °F) |
| Operating Humidity | 10 to 90% noncondensing |
| ESD/EMP Protection | Air: ±30 kV; Contact: ±30 kV |
| Software Requirement | UniFi Network version 9.1.120 or later |
| Stackable | No |
| Layer 2 Features | LACP port aggregation, STP & RSTP, QoS (DSCP), IGMP snooping, advanced IGMP (querier, fast leave, router port), 802.1X control, MAC-based ACLs & device isolation, DHCP snooping & guarding, port mirroring, port isolation, jumbo frames, LLDP-MED, voice VLAN, loop protection |
| Layer 3 Features | DHCP server (local networks), DHCP relay, inter-VLAN routing, static routing |
| Pro AV Profiles | Play, Dante, Q-SYS, NDI, SDVoE, Shure, AES67, Crestron |
| SKU | USW-Pro-XG-10-PoE |
| MPN | USW-PRO-XG-10-POE |
| Brand | Ubiquiti |
| Shipping Weight | 4.8700kg |
| Shipping Width | 0.390m |
| Shipping Height | 0.120m |
| Shipping Length | 0.520m |
Need more information or assistance with this product?
Contact us on 1300 665 970 or complete an online enquiry and one of our staff members will get back to you as soon as possible.
SKU: USW-Pro-XG-10-PoE • MPN: USW-PRO-XG-10-POE
Product Reviews
More from this category
Ubiquiti UniFi 16-port Managed Gigabit Switch - 8x PoE+ Ports, 8x Gigabit Ethernet Ports
SKU: USW-16-POEGrandstream GRP2614 Carrier-Grade 4-Line IP Phone - 4 SIP Accounts, 2.8" Colour LCD + BLF
SKU: GRP2614